Skip to main content

How to make skirt patterns clo 3d with auto pattern making tool | Parame...



I.  Overview of the 3 basic skirt pattern blocks that will be created using CLO 3D

  • A-line skirt
  • Pencil skirt
  • Mermaid skirt

II. Making A-Line Skirt Pattern Block 

A. Preparation

  1. Go to the menu and select the "Parametric Pattern" tool
  2. Click "Create"

B. Measurement/Guidelines

  1. Extend the vertical to 45 cm
  2. Create an Internal Line box
  3. Set the side segment type to "Default Corner, Mirror"
  4. Cut both patterns

C. Internal Lines Creation

  1. Create 3 internal lines from waist to hem (3 cm, 9 cm, 11 cm)
  2. Create 2 internal lines from the center to the side seam (8 cm, 17.47 cm)
  3. Create 1 internal line from skirt hem to waist (1.5 cm)

D. Creating Points via Internal Lines

  1. Use the "Edit pattern" tool
  2. Select the dart line, hip line, and hemline
  3. Extend/Trim and add a point to the pattern outline

E. Creating Skirt Darts

  1. Use the "Edit pattern" tool
  2. Lock all pattern outlines
  3. Convert all internal lines to baselines
  4. Lock all baselines (twice)
  5. Click on the dart point, right-click, and select "add dart"
  6. Set the Dart width to 2 cm, the Dart arm to 1, and the Dart length to 9 cm
  7. Press return/enter twice to confirm

F. Creating Hem Curve

  1. Remove the side seam point
  2. Convert to curve point on the dart point

G. Creating Hip Curve

  1. Use the "Edit pattern" tool
  2. Click on the point, then drag plus right-click to (0.7 cm)
  3. Convert to a curve point

H. Creating Waist Line

  1. Use the "Edit pattern" tool
  2. Extract the waist-line (3 cm)

I. Creating a Waist-Band

  1. Use the Rectangle tool
  2. Use the "Edit pattern" tool
  3. Set the Width to 17.47 and Height to 3 cm
  4. Add a point from the side seam (0.5 cm)
  5. Remove the outside point

III. Making Pencil Skirt Pattern Block 

A. Creating Skirt Hem

  1. Use the Internal Polygon/line tool
  2. Draw a line from the hem-line to the hip line
  3. Cut

B. Creating Hip Curve

  1. Use the Smooth Curve tool
  2. Click on the hip point, then drag in-ward plus right-click (50%, 7)

IV. Making Mermaid Skirt Pattern Block 

A. Preparation

  1. Use the "Edit pattern" tool
  2. Extend the pattern outline to 60 cm
  3. Check the Create Internal Line box
  4. Set the side segment type to "Default Corner, Mirror"

Comments

Popular posts from this blog

How to Change Avatar Size in CLO 3D Easy Step-by-step

How to Change the Avatar’s Size in CLO3D step by step video By the end of this video, you will know how to change your Avatar’s size, save it for your future use, and import it back into your clo-workspace quick and easily in CLO3D. To Change the Avatar’s Size in CLO3D Selecting the Avatar: go to Library Panel and under Favorites select Avatar double click on it to open the folders. After you open the folders below here under the Library Panel you will see many folders. Double click on the Female_V1 folder to open. Next, hover your mouse over the Avatar called FV1_Kelly.avt and double click on her to open. How to Open Avatar Editor Window: while the Avatar is still open, to the menu and select Avatar, click on it to open the menu and select the Avatar Editor. Then, the Avatar Editor window pops up. How to Change the Avatar’s Size: the Avatar Editor window has three menus. These are included the Avatar Size, Measure, and Arrangement. In this video, we only need to focus on one menu whic...

How to Change the Avatar Size quick and easy with grading rule for clo 3d

When it comes to customizing avatars it is not everyone a cup of tea, however, with clo3d 6.1 it has never been easier. Changing the avatar size is the first step of grading a garment in clo3d. After, changing the avatar sizes, let the computer does the grading for you. Here is an easy step-by-step changing the avatar size as well as some grade rules for women’s and petite sizes charts. Hope you find this article helpful. Encoder Fashion Women’s Sizes Chart/Grade Rule for CLO3D Grading Rule | Size Chart for CLO3D from XS-XL in CM/IN | Encoder Fashion Women’s Size Chart for  CLO3D Encoder Fashion Petite Size Chart | Grade Rules for CLO3D Encoder Fashion petite size chart | grade rules 5 sizes from xs to xl in IN|CM Important Note:  1 in / 2.5 cm up-size for the “Total Height.” How to Change the Avatar Size | CLO3D Quick and efficient ways to change the avatar size in clo3d. Changing the sizes of the avatar has never been easier. You only need 4 measurements to make it work. See...

How to Sew and Construct a Woman Blazer with Shoulder Pads and Lining in CLO 3D

Hello, Designistas! In this video, I will demonstrate the quickest and easiest way to construct a blazer with shoulder pads and linings in Clo 3D. To clarify any confusion, I've also provided you with step-by-step guidelines here below. Step 1: How to Prepare the Shell for Sewing a Blazer Remove everything except 1/2 of the patterns. Place the pattern onto the avatar. Sew the pattern. Make a copy using symmetry with sewing. Apply folds to lapels (fold strength: 5, fold angle: 360, fold rendering: on). Hems and sleeves: (fold strength: 5, fold angle: 0, fold rendering: on). Sew all the hems. Simulate and check the internal lines. Apply the fabrics (wool cashmere). Remove the front sewing. Sew the buttonhole (width: 3.5), and button (width: 3). Fasten the buttons. Change the button/buttonhole color to pink. Sew shoulder pads. Sew the pockets. Make a fabric copy and apply that to pockets (change the color to slightly darker). Step 2: How to Prepare the Lining for Sewing a Blazer Make ...