Skip to main content

How to Sew a Buttonhole with Brother CS-6000i

A step-by-step video on how to sew a buttonhole using Brother CS-6000i

Hello Designistas! Welcome to Encoder Fashion, I’m Rose. Today I’m going to show you how to sew a buttonhole with a Brother CS-6000i sewing machine. I also want to share with you the tips and tricks on how to sew this buttonhole.

My Brother CS-6000i Sewing Machine Photo
My Brother CS-6000i Sewing Machine Photo

This is my brother's cs-6000i sewing machine. I’m going to show you tips and tricks on how to use this machine to sew a perfect buttonhole.

This machine comes with many buttonhole functions. However, my favorite buttonhole function is number 30.

The function number 30 is just perfect for a shirt or a jacket. It’s not too thin or too thick.

Tips and Tricks to Create a Perfect Buttonhole

Placing a Button inot a Buttonhole Foot Slot Photo
Placing a Button into a Buttonhole Foot Slot Photo

First, place a button onto the buttonhole slot to get a perfect fit. Slide the button in and out of the buttonhole slot to get the right fit.

Next, connect this buttonhole foot to your cs-6000i sewing machine. Then pull down the buttonhole handle between these buttonhole foot markers.

After that select the buttonhole function. I selected number 30, again because it is just right for me. It’s not too thin or too thick.

Finally, you can select the gear on your sewing machine whether you want slow, medium, or fast mode. I Prefer a fast mode.

Now, place your foot onto the pedal, and let’s sew.

Click this video (How to Sew a Buttonhole with Brother CS-6000i) link for more details on how to sew this buttonhole.

Thanks, for watching Designistas. If you think this video is useful, kindly subscribe to my youtube channel via Encoder Fashion. I’m Rose and You can Design anything!

Comments

Popular posts from this blog

How to Change Avatar Size in CLO 3D Easy Step-by-step

How to Change the Avatar’s Size in CLO3D step by step video By the end of this video, you will know how to change your Avatar’s size, save it for your future use, and import it back into your clo-workspace quick and easily in CLO3D. To Change the Avatar’s Size in CLO3D Selecting the Avatar: go to Library Panel and under Favorites select Avatar double click on it to open the folders. After you open the folders below here under the Library Panel you will see many folders. Double click on the Female_V1 folder to open. Next, hover your mouse over the Avatar called FV1_Kelly.avt and double click on her to open. How to Open Avatar Editor Window: while the Avatar is still open, to the menu and select Avatar, click on it to open the menu and select the Avatar Editor. Then, the Avatar Editor window pops up. How to Change the Avatar’s Size: the Avatar Editor window has three menus. These are included the Avatar Size, Measure, and Arrangement. In this video, we only need to focus on one menu whic...

How to Change the Avatar Size quick and easy with grading rule for clo 3d

When it comes to customizing avatars it is not everyone a cup of tea, however, with clo3d 6.1 it has never been easier. Changing the avatar size is the first step of grading a garment in clo3d. After, changing the avatar sizes, let the computer does the grading for you. Here is an easy step-by-step changing the avatar size as well as some grade rules for women’s and petite sizes charts. Hope you find this article helpful. Encoder Fashion Women’s Sizes Chart/Grade Rule for CLO3D Grading Rule | Size Chart for CLO3D from XS-XL in CM/IN | Encoder Fashion Women’s Size Chart for  CLO3D Encoder Fashion Petite Size Chart | Grade Rules for CLO3D Encoder Fashion petite size chart | grade rules 5 sizes from xs to xl in IN|CM Important Note:  1 in / 2.5 cm up-size for the “Total Height.” How to Change the Avatar Size | CLO3D Quick and efficient ways to change the avatar size in clo3d. Changing the sizes of the avatar has never been easier. You only need 4 measurements to make it work. See...

How to Sew and Construct a Woman Blazer with Shoulder Pads and Lining in CLO 3D

Hello, Designistas! In this video, I will demonstrate the quickest and easiest way to construct a blazer with shoulder pads and linings in Clo 3D. To clarify any confusion, I've also provided you with step-by-step guidelines here below. Step 1: How to Prepare the Shell for Sewing a Blazer Remove everything except 1/2 of the patterns. Place the pattern onto the avatar. Sew the pattern. Make a copy using symmetry with sewing. Apply folds to lapels (fold strength: 5, fold angle: 360, fold rendering: on). Hems and sleeves: (fold strength: 5, fold angle: 0, fold rendering: on). Sew all the hems. Simulate and check the internal lines. Apply the fabrics (wool cashmere). Remove the front sewing. Sew the buttonhole (width: 3.5), and button (width: 3). Fasten the buttons. Change the button/buttonhole color to pink. Sew shoulder pads. Sew the pockets. Make a fabric copy and apply that to pockets (change the color to slightly darker). Step 2: How to Prepare the Lining for Sewing a Blazer Make ...